WCA inspection rules explained

Updated:

Before every speedsolve at a WCA competition you get 15 seconds to look at the scrambled puzzle. Knowing exactly how inspection works, and practising with it, saves you penalties and makes your home averages match your competition results.

What inspection is

Inspection is the period between seeing the scrambled puzzle and starting the timer. At a competition, the scrambled puzzle is placed in front of you under a cover. When you are ready, the cover is lifted and the judge starts a stopwatch. From that moment you may pick up the puzzle, turn it in your hands and study it, but the official solve time has not started yet.

Most cubers use inspection to plan the cross on 3x3, and stronger solvers also track where the first F2L pair will be. On other puzzles you might plan the first layer, the first block or the first few moves of a Square-1 shape.

The rules below are a plain-language summary of the WCA Regulations. If something is unclear at a competition, the official Regulations and the delegate have the final word.

The 15-second limit, +2 and DNF

You have 15 seconds of inspection. Inspection ends when you start the solve, which on a Stackmat means lifting your hands from the timer. What happens depends on when that is:

You start the solve afterResult
15 seconds or lessNo penalty
More than 15 but less than 17 seconds+2 seconds added to the time
17 seconds or moreDNF (the attempt is disqualified)

The two-second window is a buffer, not extra time to use. A +2 on a 12-second solve is a 17% increase, which usually decides whether that solve is counted or dropped in your average. Penalties also add up: an inspection +2 plus a +2 for a face left misaligned after the solve gives +4.

The 8-second and 12-second calls

The judge calls out the elapsed inspection time twice: "8 seconds" when 8 seconds have passed and "12 seconds" when 12 have passed. These calls are warnings. They do not mean you must start; they tell you how much time is left.

A practical habit: when you hear "8 seconds", finish your plan. When you hear "12 seconds", put the puzzle down and place your hands on the timer. Getting into position on a Stackmat takes a moment, and that moment counts as inspection time.

What you can and cannot do during inspection

  • Allowed: picking up the puzzle, rotating it as a whole, and looking at every side.
  • Not allowed: applying moves, including partial turns of a layer. Applying moves during inspection results in a DNF.
  • Before starting: the puzzle goes back on the mat, and you place your hands flat on the Stackmat sensors before releasing to start.

Accidental moves happen most often when you rotate the puzzle quickly. Hold it firmly by opposite centres or corners while inspecting, especially with loose cubes and Megaminx.

Events without inspection

Blindfolded events work differently. In 3x3, 4x4 and 5x5 blindfolded there is no separate inspection: the timer starts when the cover is lifted, and memorisation is part of your time. In Multi-Blind, memorisation is also part of a single overall time limit. Fewest Moves is not timed like a speedsolve and has its own time limit for finding a solution.

How to practise inspection at home

Turn on WCA inspection in the Scramble Timer timer. The timer counts the 15 seconds and applies +2 or DNF automatically, the same way a judge would. Then build these habits:

  1. Use inspection on every practice solve, not only before competitions. Your averages become comparable with official ones.
  2. Plan the full cross in 8 seconds or less. Use the built-in cross solver afterwards to compare your plan with an efficient solution.
  3. Once the cross is reliable, spend the remaining seconds tracking one F2L pair.
  4. Review every +2 in your session. If they keep appearing, start earlier rather than planning more.

Penalties change your ao5 in a specific way, which is explained in how to calculate ao5. If you want to understand the scramble you are inspecting, read scramble notation explained.

FAQ

How long is WCA inspection?

15 seconds. Starting the solve after 15 but before 17 seconds adds a +2 penalty, and starting at 17 seconds or later is a DNF.

Can I turn the cube during inspection?

You can rotate the whole puzzle to look at it, but you may not apply any moves. Turning a layer during inspection results in a DNF.

Is there inspection in blindfolded events?

No separate inspection. In blindfolded events the timer starts when the cover is lifted, so memorisation counts towards your time.

Should I always practise with inspection?

Yes, if you compete or plan to. Practising without it hides +2 problems and makes your home averages look better than your competition results will be.

Keep reading